Table of Contents
Increasing the Initiation Rate
Initiation Rate = 2
Resources
Initiation Rate, Latency
Generalized Schedule
Schedule Clk I+0
Schedule Clk I+1
Schedule: Clks I+2, I+3
Resource Comparison
Execution Unit Utilization table
Init Rate = 1
Resource Comparison Again
Less Clock cycles, Lower Clock Period
Recall what Pipelining of Multiplier does
Assume Multiplier is pipelined by 2 stages
When using Pipelined Execution Units, noting clock cycle cost nodes is helpful
Increasing Initiation Rate to 2
Increasing Initiation Rate to 2
Schedule, Init Rate =2,
|
Author: Bob Reese
Email: reese@erc.msstate.edu
Home Page: http://www.erc.msstate.edu/~reese
Download presentation source
|